| Specification | Details |
|---|---|
| Product | MikroTik hAP lite |
| Model | RB941-2nD |
| Product Type | 2.4 GHz Wireless Router / Access Point |
| Wi-Fi Generation | Wi-Fi 4 |
| Wireless Standard | 802.11b/g/n |
| Wireless Frequency | 2.4 GHz |
| Wireless Chains | 2 × 2 MIMO |
| Maximum Wireless Data Rate | 300 Mbps |
| Antenna Gain | 1.5 dBi |
| Wireless Chipset | QCA9533 |
| Ethernet Ports | 4 × 10/100 Mbps Fast Ethernet |
| Auto MDI/MDIX | Yes |
| CPU | QCA9533 |
| CPU Cores | 1 |
| CPU Frequency | 650 MHz |
| RAM | 32 MB |
| Storage | 16 MB Flash |
| Operating System | MikroTik RouterOS |
| RouterOS License | Level 4 |
| USB / Power Port | 1 × MicroUSB |
| Power Input | 5V DC |
| Included Power Adapter | 5V, 1A |
| Maximum Power Consumption | 3.5W |
| Cooling | Passive |
| WPS | Yes, via button |
| cAP Mode | Supported |
| CAPsMAN Support | Yes |
| Reset Button | Yes |
| ESD Protection | 10 kV on RF ports |
| Management | RouterOS / WebFig / WinBox |
| Wall Mounting | Supported |
| Dimensions | 113 × 89 × 28 mm |
| Operating Temperature | -20°C to 60°C tested |
| MTBF | Approximately 100,000 hours at 25°C |
| Certifications | FCC, IC |
Ubiquiti airFiber AF-5XHD
Original price was: 1,737.00.
The Ubiquiti airFiber 5XHD AF-5XHD is a professional 5GHz point-to-point radio designed for high-capacity wireless backhaul and WISP deployments. It uses spectrally efficient, noise-resilient wireless technology to provide high-throughput connections over long distances when paired with a compatible airFiber X antenna.
Ubiquiti specifies 1+ Gbps maximum throughput and a 100+ km maximum range, with actual performance and distance depending on environmental conditions, antenna selection, frequency regulations and link configuration.
FAQ
What is the Ubiquiti airFiber 5XHD AF-5XHD?
The Ubiquiti airFiber 5XHD AF-5XHD is a 5GHz point-to-point wireless backhaul radio designed for high-capacity WISP, enterprise and long-distance network links.
What is the maximum throughput of AF-5XHD?
Ubiquiti specifies a maximum throughput of 1+ Gbps. Actual throughput depends on RF conditions, antenna configuration, channel bandwidth, distance and other environmental factors.
What is the maximum range of airFiber 5XHD?
Ubiquiti specifies a maximum range of 100+ km. This is dependent on environmental conditions, antenna configuration, regulatory requirements and the specific wireless link design.
Does AF-5XHD include an antenna?
The AF-5XHD is a radio unit designed to be paired with a compatible airFiber X antenna. The radio itself is not the complete dish antenna system.
What frequency does AF-5XHD use?
The worldwide specification lists 4800–6200 MHz, subject to regional regulatory restrictions.
What channel widths are supported?
AF-5XHD supports 10, 20, 30, 40, 50, 60, 80 and 100 MHz selectable channel bandwidths.
Does AF-5XHD support GPS synchronization?
Yes. The AF-5XHD supports GPS synchronization using its external GPS antenna connection.
What Ethernet ports are available on AF-5XHD?
The current Ubiquiti technical specification lists two Gigabit RJ45 networking interfaces.
What PoE adapter is included with AF-5XHD?
Ubiquiti includes a 24V 1A Gigabit PoE adapter with the AF-5XHD.
Is AF-5XHD suitable for outdoor use?
Yes. The radio is specified for an operating temperature range of -40°C to 55°C and supports IP67 weatherproofing after installation of the included IP67 upgrade kit.
Is the Ubiquiti airFiber 5XHD a complete point-to-point kit?
No. The AF-5XHD is the radio component. A point-to-point link normally requires compatible antennas and two radio endpoints, with the exact antenna and mounting configuration selected according to the required distance and deployment.



Reviews
There are no reviews yet.